How do I connect my TV to the satellite?

For the best viewing experience, follow these steps to connect your TV to the satellite cable and receive the Nilesat broadcast.

Steps

1. Make sure the satellite cable is connected to the TV correctly.
2. Press the Home button on the remote control, then open the TV settings.
3. In the TV settings:
   • TVs from before 2024: choose “Broadcasting”.
   • TVs from 2024 onward: choose “General & Privacy”.
4. In the Broadcasting menu, choose “Auto Tuning”.
5. In the Auto Tuning menu:
   • TVs from before 2024: choose Eutelsat/Nilesat 201.
   • TVs from 2024 onward: just choose “Auto Tuning”.
6. Open “LNB settings” and set the DiSEqC port to Off.
7. From the same “LNB settings”, check the signal level:
   • Green: the signal is good.
   • Not green: change the DiSEqC port until you get a proper signal lock.

When setup is complete, go back to the OSNtv app and enjoy your content.