How do I connect my OSNtv receiver to the internet using Wi-Fi or an Ethernet cable?

You can connect your OSNtv receiver to the internet using Wi-Fi or an Ethernet cable, depending on the model.

OSNtv Box – Wi-Fi

1. Press Home on your remote.
2. Open Settings from the menu at the top of the screen.
3. Select Network.
4. Select your Wi-Fi network and follow the on-screen instructions to enter the password and connect.

OSNtv Box – Ethernet

Connect an Ethernet cable to the receiver’s Ethernet port and to your router. The receiver should connect automatically if the cable and network are working correctly.

OSN Plus HD Box – Ethernet

1. Unplug the receiver.
2. Remove the USB Wi-Fi dongle, if connected.
3. Connect an Ethernet cable between the receiver and router.
4. Reconnect the receiver to power and switch it on.
5. Press Menu, then open Settings.
6. Select Device Setup and enter your PIN if prompted.
7. Select Network Setup, then Ethernet.
8. Press the blue button to save changes if this option appears.

Menu names may vary by software version. If the receiver does not connect, check your router’s internet connection and make sure the cable is secure.