Remote control not working (OSN Plus HD and Show Box)

These steps apply to the OSN Plus HD Box, OSN Plus HD Wi-Fi Box and Show Box.

If the remote doesn’t respond, try these steps depending on your receiver:

1. Replace the batteries and make sure they are inserted in the correct direction.
2. Remove anything between the remote and the receiver’s infrared sensor.
3. On the OSN Plus HD Box and Show Box: press V- and OK together.
4. On the OSN Plus HD Wi-Fi Box: press 1 and 7 together until the indicator flashes twice, then press 1 and 1, then OK.

Note: Use these steps only with the remote type that matches your receiver.